1500 Watt Peak Power Rectifier Diode Transient Voltage Suppressors 1.5KE68A
diode rectifier circuit
,signal schottky diode
1.5KE SERIES
1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
FEATURES
* 1500 Watts Surge Capability at 1ms
* High temperature soldering guaranteed:
260 ℃ / 10 seconds / .375"(9.5mm) lead leCM GROUPh, 5lbs.(2.3kg) tension
* Typical IR less than 1 μA above 10V
* Fast response time: Typically less than 1.0ps from 0 volt to BV min.
* Low zener impedance
* Excellent clamping capability
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
* Weight: 1.20 grams
VOLTAGE RANGE 6.8 to 440 Volts
1500 Watts Peak Power
5.0 Watts Steady State
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 ℃ ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
| RATINGS | SYMBOL | VALUE | UNITS |
| Peak Power Dissipation at TA=25 ℃, TP=1ms(NOTE 1) | PPK | Minimum 1500 | Watts |
|
Steady State Power Dissipation at TL=75 ℃ Lead LeCM GROUPh .375"(9.5mm) (NOTE 2) |
PD | 5.0 | Watts |
|
Peak Forward Surge Current at 8.3ms Single Half Sine-Wave superimposed on rated load (JEDEC method) (NOTE 3) |
IFSM | 200 | Amps |
| Operating and Storage Temperature Range | TJ, TSTG | -55 to +175 | ℃ |
NOTES:
1. Non-repetitive current pulse per Fig. 3 and derated above TA=25 ℃ per Fig. 2.
2. Mounted on Copper Pad area of 0.8" X 0.8" (20mm X 20mm) per Fig.5.
3. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
DEVICES FOR BIPOLAR APPLICATIONS
1. For Bidirectional use C or CA Suffix for types 1.5KE6.8 thru 1.5KE440.
2. Electrical characteristics apply in both directions.
RATING AND CHARACTERISTIC CURVES (1.5KE SERIES)
0402 0.063W 10kOhm SMT Thick Film Chip Resistor RC0402JR-0710KL
200MHz MPZ1608S300ATAH0 Chip Beads 5A For Power Line TDK SMD0603
22R 5% SMD0402 Film Chip Resistors ERJ-2GEJ220X PANASONIC
MOV-20D751K 750V 6.5kA Varistor blue SMD Chip Resistor 1 Circuit Through Hole Disc 20mm
2SB1261-TP 10W General Purpose Rectifier Diode Silicon Epitaxial Planar Pnp Transistor
IXFK140N30P Polar Power Mosfet Hiperfet TO264 300V 140A
DF2B29FU,H3F TVS 24VWM 47V ESD Protection Diodes
PMEG6010ER 1A Low VF MEGA Schottky Barrier Rectifier SOD123
SK34SMA 3A SMD Schottky Barrier Rectifier Diodes DO - 214AC
SMBJ5.0A Silicon Avalanche Diodes 600W Surface Mount TVS Diodes
| Image | Part # | Description | |
|---|---|---|---|
|
|
0402 0.063W 10kOhm SMT Thick Film Chip Resistor RC0402JR-0710KL |
10 kOhms ±5% 0.063W, 1/16W Chip Resistor 0402 (1005 Metric) Moisture Resistant Thick Film
|
|
|
|
200MHz MPZ1608S300ATAH0 Chip Beads 5A For Power Line TDK SMD0603 |
30 Ohms 1 Power Line Ferrite Bead 0603 (1608 Metric) 5A 10mOhm
|
|
|
|
22R 5% SMD0402 Film Chip Resistors ERJ-2GEJ220X PANASONIC |
22 Ohms ±5% 0.1W, 1/10W Chip Resistor 0402 (1005 Metric) Automotive AEC-Q200 Thick Film
|
|
|
|
MOV-20D751K 750V 6.5kA Varistor blue SMD Chip Resistor 1 Circuit Through Hole Disc 20mm |
750 V 6.5 kA Varistor 1 Circuit Through Hole Disc 20mm
|
|
|
|
2SB1261-TP 10W General Purpose Rectifier Diode Silicon Epitaxial Planar Pnp Transistor |
Bipolar (BJT) Transistor PNP 60 V 3 A 50MHz 1 W Surface Mount D-Pak
|
|
|
|
IXFK140N30P Polar Power Mosfet Hiperfet TO264 300V 140A |
N-Channel 300 V 140A (Tc) 1040W (Tc) Through Hole TO-264AA (IXFK)
|
|
|
|
DF2B29FU,H3F TVS 24VWM 47V ESD Protection Diodes |
47V Clamp 3A (8/20µs) Ipp Tvs Diode Surface Mount USC
|
|
|
|
PMEG6010ER 1A Low VF MEGA Schottky Barrier Rectifier SOD123 |
Diode 60 V 1A Surface Mount SOD-123W
|
|
|
|
SK34SMA 3A SMD Schottky Barrier Rectifier Diodes DO - 214AC |
Diode 40 V 3A Surface Mount DO-214AC, SMA
|
|
|
|
SMBJ5.0A Silicon Avalanche Diodes 600W Surface Mount TVS Diodes |
9.2V Clamp 65.3A Ipp Tvs Diode Surface Mount DO-214AA (SMBJ)
|